Orbit Wireless Charger (White)
114085
50
Description: Next-generation 5W wireless phone charger that will charge devices that are enabled for wireless charging and will work with most modern phones. Simply plug it into any USB port or a mains adapter and place a compatible device on it for convenient wireless charging.
Orbit is supplied with an 80cm Micro-B USB cable and an instruction leaflet.
Colour: White/Bright Green.
Dimensions: W 70mm × L 70mm × 9mm.
Specifications:
- Charging position: flat
- Input power: DC 5V/1.5A
- Output power: DC 5V/0.8A
- Input cable: Micro-B | 80cm
- Wireless output: 5W
- Charging pads: 1
- Max. induction distance: 2–6mm
- Frequency: 110–205KHz
- Indicator: single LED
Materials:
- Charging surface: Acrylonitrile Butadiene Styrene (ABS) & silicone
- Base: Acrylonitrile Butadiene Styrene (ABS)
- Gift box: cardboard
Packaging: Individual box.
Note: Phone not included.
Price: from NZD $3.75 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Specific Colour Print 45mm circle.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Full Colour Print (Direct Digital) 45mm circle.×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| White/Bright Green | 8 | - |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
