Bamboo 15W Wireless Fast Charger 125555
50Description: A handy 15W wireless charger with fast charging capability, this charger features a natural bamboo charging pad and an aluminium base. An outer ring illuminates to indicate charging status.
For convenient wireless charging, simply plug it into any USB port or mains adapter and place a compatible device on the bamboo charging pad.
The charger will work with most modern devices and is presented in a printed black gift box with instructions.
Colour: Natural/Black
Dimensions:
- Charger: Diameter 101mm × 8.5mm
- Gift box: H 125mm × W 106mm × 27mm
Packaging: Individual gift box
Price: from NZD $15.25 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
- Charging Position: Flat
- Specification Note: Fast charging will work at the optimum power level when used with a 20W or more QC (Quick Charge) or PD (Power Delivery) mains adaptor. Using a PC/laptop USB output may lead to slow charging
- Input Power: DC 5V/2A
- Wireless Output: 5W
- Charging Pads: 1
- Laser Engrave Finish: Natural Etch
- Fast Wireless Charging: Yes (With Compatible Devices)
- Indicator: LED Ring
- Max Induction Distance: 2
- Frequency: 110KHz
- Input Cable: Type
- Material Note: Bamboo is a natural material which produces unavoidable variances in the grain pattern
- Country Of Origin: China
- Charging Surface: Bamboo
- Base: Aluminium
-
Specific Colour Print 55mm × 55mm or 65mm × 35mm×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Laser Engraving 55mm × 55mm or 65mm × 35mm×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Natural/Black | 330 | Mid May |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
