Helix 16GB Flash Drive
108474
50
Description: Classic flash drive with a metal swivel and a soft touch rubber lacquered case. It has 16GB of memory with a USB 2.0 interface and data uploading is available on request.
Helix can be presented in an optional magnetic closure gift box or the optional Helix Mini Case.
Colours: Silver/Black, White/Black, Yellow/Black, Orange/Black, Red/Black, Bright Green/Black, Green/Black, Teal/Black, Light Blue/Black, Blue/Black, Purple/Black, Black/Black.
Dimensions:
- Flash drive: L 56mm × W 20mm × 10mm.
- Gift box: L 95mm × W 44mm × 22mm.
- Mini case: L 70mm × W 25mm × 15mm.
Specifications:
- Data storage capacity: 16GB
- Opening: Swivel
- Interface: USB2.0
- Max. read speed: 10MB/s
- Max. write speed: 3MB/s
- Laser engrave finish: Silver swivel—natural etch
Materials:
- Case: Acrylonitrile Butadiene Styrene (ABS)
- Swivel: Aluminum
Packaging: Bubble wrap sleeve or optional magnetic closure gift box or helix mini case.
Price: from NZD $6.22 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Select Colour
-
Specific Colour Print 28mm × 15mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Laser Engraving 28mm × 15mm (silver swivel).×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Full Colour Print (Direct Digital) 28mm × 15mm.×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
-
-
Specific Colour Print Gift box: 60mm × 20mm (one colour).×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
-
-
(Positions)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Black Case 16GB | 1200 | - |
| Silver USB Swivel | 3450 | Late Jan 2025 |
| White USB Swivel | 8300 | - |
| Yellow USB Swivel | 3050 | - |
| Orange USB Swivel | 1450 | - |
| Red USB Swivel | 2900 | - |
| Bright Green USB Swivel | 720 | - |
| Dark Green USB Swivel | 2200 | - |
| Teal USB Swivel | 2300 | - |
| Light Blue USB Swivel | 3650 | - |
| Dark Blue USB Swivel | 4250 | - |
| Purple USB Swivel | 960 | - |
| Black USB Swivel | 7600 | - |
| Helix Mini Case | 1100 | - |
| Gift Box to fit Helix Flash Dr | 540 | - |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
