Limestone Power Bank
122466
25
Description: Stylish 5W power bank with natural limestone and bamboo casing. The 1200mAh battery can be recharged in four hours from a USB port or mains adaptor.
The power bank has a 5V/1A Micro-B input and 5V/1A USB-A output.
The speaker is presented in Kraft packaging with Natura branding. A Micro-B USB cable and instructions are included.
Due to the nature of the natural limestone material, there can be slight unavoidable variances in the texture and finishing of the limestone casing.
Colour: Charcoal.
Dimensions:
- Power Bank: L 98mm × W 33mm × 33mm
- Gift box: H 124mm × W 60mm × 60mm
Packaging: Individual gift box.
Price: from NZD $11.75 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
- Brand: NATURA
- Battery Capacity: 1200mAh
- Battery Type: Rechargeable Lithium
- Input: Micro
- Output: USB
- Engraving Finish: Natural Etch
- On/off Mechanism: Automatic
- Battery Indicator: Single LED
- Recharge Time (With a mains adaptor): 4 hours
- Input Cable: Micro
- Note: Due to the nature of the natural limestone material
- Country of Origin: China
- Casing: Limestone Cement | Sand
- Trim: Bamboo
- Gift Box: Kraft Cardboard
-
Specific Colour Print 60mm × 15mm×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
(Positions)- 1
- 2
- 3
- 4
-
Laser Engraving 65mm × 20mm×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
- 3
- 4
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Charcoal | 180 | - |
| Triple Connector Cable | 8600 | Early Oct |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
