Cypher Charging Cable
112551
50
Description: Mobile charging cable for phones, tablets, cameras, GPS, etc. It offers four different connectors in one compact unit which lights up when it is being used. Cypher has a USB connector cable which snaps into the housing when not in use to make a handy loop for securing it to bags and key rings. The other three cables are a Micro-B connector, a Lightning connector and a USB Type-C connector.
This device is for charging only and is not designed for data connections.
Colours: Clear, Blue.
Dimensions: L 130mm × W 37mm × 18mm.
Packaging: Loose packed.
Price: from NZD $5.62 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
- Upstream Connector: USB Type
- Downstream Connector: Type
- Micro: B & Lightning
- Cable Length: 23cm
- Max. Power: 1.5A
- Key Ring: No
- Light Up: Yes
- Country Of Origin: China
- Cable Jacket: Thermoplastic Elastomer (TPE)
- Connector: Copper & Iron
- Connector Head: Acrylonitrile Butadiene Styrene (ABS)
- Hub: Acrylonitrile Butadiene Styrene (ABS)
-
Select Colour
-
Specific Colour Print 25mm × 25mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
(Positions)- 1
- 2
-
Full Colour Print (Direct Digital) 25mm × 25mm.×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| White/Clear | 880 | Early Sep |
| White/Blue | 1500 | - |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
