Polaris Bluetooth Speaker 107692
10Description: Stylish 3W Bluetooth speaker which offers high definition stereo sound and is compatible with all mobile devices that support Bluetooth. It has a wireless connectivity range of over 10 metres and can also be used with an audio cable.
Playing time is 3–4 hours and it is easily recharged from a laptop, a power bank or a USB mains adapter. It has a microphone for phone calls and music playback can be controlled directly from the speaker.
Polaris is presented in a gift box with a Micro-B USB cable, an audio cable and an instruction leaflet.
The blue and black speakers engrave to a shiny steel finish and the silver speaker engraves to an oxidised white.
Colours: Matt Silver, Matt Blue, Matt Black.
Dimensions:
- Speaker: diameter 57 mm × H 57 mm
- Gift box: H 115mm × W 70 mm × 70mm.
Specifications:
- Speaker: diameter 40 mm 4 Ω 3 W.
- Bass mode: diameter 53 mm.
- Lithium polymer battery input: 500 mAh (DC 5 V).
- SNR: 90 ± 3db.
- Frequency response: 100 Hz–20 kHz.
- Bluetooth version: 2.1
- Operating distance: approximately 10 metres.
- Playing time: 3–4 hours.
- Charging time: 2–3 hours.
- Unit size: 59.5 mm × 57 mm.
- Gross weight: 165 grams.
Packaging: Gift box.
Price: from NZD $14.38 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Select Colour
-
Specific Colour Print Speaker: 35mm × 25mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
(Positions)- 1
- 2
-
Specific Colour Print Gift box: 50mm × 30mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Laser Engraving Speaker: 50mm × 25mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Matt Silver | 250 | Mid Jan 2025 |
| Matt Blue | 640 | Mid Feb 2025 |
| Matt Black | 2600 | - |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
