Yeti Premium Cooling Towel (Full Colour)—Tube
113398
50
Description: Incredible towel which is manufactured from a 50/50 blend of nylon and polyester. Premium cooling towels have 50% nylon content and will cool faster than similar products made from 100% polyester or Dacron. Nylon fibres completely repel water which evaporates much faster when it contacts them. Yeti will cool up to 15 degrees below the outdoor temperature in seconds by harnessing the power of this rapid evaporation.
To activate it, simply wet the towel, wring it out and snap it tight to remove excess water. It is worn around the neck or head and natural, chemical-free cooling will last as long as the towel remains wet. Yeti is ideal for use when playing sports, jogging, walking, biking, at the gym, working outdoors, etc. It can also be used as a sports or gym towel. It is presented in a carabineer tube which include full instructions.
Colour: White (with a full colour print).
Dimensions:
- Towel: L 1000mm × W 300mm.
- Tube: Diameter 69mm × H 170mm.
Packaging: Carabiner tube.
Price: from NZD $9.04 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Specific Colour Print Tube: 25mm × 40mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Screen Print Tube: 80mm × 60mm.×
Screen Print
Screen printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for branding flat or cylindrical objects.
Advantages
- Large print areas are possible on both flat and cylindrical products.
- Close PMS matches are possible on white or light coloured products.
- Ideal for large solid areas of colour.
- Most screen print inks are quick drying and can be shipped immediately after printing.
- Metallic gold and silver is available.
Limitations
- Halftones and very fine lines are not recommended.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Unable to print variable data.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Included Full Colour Print (Sublimation) Towel: 1000 × 300mm (plus bleed if required).×
Sublimation Print
Sublimation print is used for branding products that have a special coating on them or fabrics suitable for the sublimation process. A transfer is produced by printing sublimation ink onto transfer paper and then heat pressing it onto the product.
Advantages
- Sublimation ink is actually a dye so there is no ink build-up on the finished print and it looks like part of the product.
- Ideal for producing vivid full colour images as well as spot colour branding.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- The branding can bleed off some products.
Limitations
- Can only be used for suitable products with white surfaces.
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- When printing large images some minor imperfections may appear in the print or around the edges of it. These are unavoidable.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| White | 1250 | Early Jan 2025 |
| Clear/Black Tube | 0 | Early Jan 2025 |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
