Atara Message Pen 110818
1000Description: Retractable plastic ballpoint pen with a white barrel, a soft rubber grip and a rotating inner barrel which holds six different messages. Each time the push button is clicked, a new message is displayed in the two clear barrel windows. It has a blue or black refill with 1200 metres of German manufactured Dokumental ink
Colours: Orange, Red, Green, Light Blue, Dark Blue, Black.
Dimensions: Diameter 12mm × L 145mm × 14mm (includes clip).
Specifications:
- Writing distance: 1200m
- Refill type: ball
- Refill colour: blue or black
- Mechanism: retractable
- Trim: colour matched with a white tip
- Grip finish: matt
- Message pen: Yes
Materials:
- Barrel: Acrylonitrile Butadiene Styrene (ABS)
- Grip: rubber
- Clip: Acrylonitrile Butadiene Styrene (ABS)
- Tip: Acrylonitrile Butadiene Styrene (ABS)
- Ball: tungsten carbide
- End cap: Acrylonitrile Butadiene Styrene (ABS)
Packaging: Loose packed.
Note: Price breaks apply per colour/artwork design. A production lead time of 40 working days applies to this product by air freight and orders can be sea freighted on request to reduce the freight cost.
Price: from NZD $0.79 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Select Colour
-
Included Screen Print Message (6 messages): 40mm × 4mm (one colour).×
Screen Print
Screen printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for branding flat or cylindrical objects.
Advantages
- Large print areas are possible on both flat and cylindrical products.
- Close PMS matches are possible on white or light coloured products.
- Ideal for large solid areas of colour.
- Most screen print inks are quick drying and can be shipped immediately after printing.
- Metallic gold and silver is available.
Limitations
- Halftones and very fine lines are not recommended.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Unable to print variable data.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Specific Colour Print Position K: 70mm × 8mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
Stock Levels
No stock level information available currently.