BRANDCRAFT Fantail Wooden Model
124050
20
Description: This model fantail is expertly laser cut from an A4 sheet of Basswood. The interlocking design means that pieces easily slot together and no tools are needed for assembly.
Overlay your brand onto the default digital template to bring your brand to life.
Basswood is a lightweight and strong wood perfectly suited for crafting.
Colour: Natural
Dimensions:
- Flatpack Sheet: H 295mm × W 208mm × 2mm
- Assembled: L 145mm × H 143mm × 133mm
- Sleeve: H 310mm × W 221mm
Packaging: Individual cardboard sleeve
Branding Note: The colours of the product cannot be customised. It can only be supplied in the preset colour layout (as per template). Branding cost and setup charge will still be applicable for printing of the pre-set colour layout.
Price: from NZD $5.63 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Screen Print Wooden model: refer to template (one colour, all positions)×
Screen Print
Screen printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for branding flat or cylindrical objects.
Advantages
- Large print areas are possible on both flat and cylindrical products.
- Close PMS matches are possible on white or light coloured products.
- Ideal for large solid areas of colour.
- Most screen print inks are quick drying and can be shipped immediately after printing.
- Metallic gold and silver is available.
Limitations
- Halftones and very fine lines are not recommended.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Unable to print variable data.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Full Colour Print (Direct Digital) Wooden model: refer to template (all positions)×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Laser Engraving Wooden model: refer to template (all positions)×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Fantail 3D Wooden Model | 1050 | - |
| Sleeve for Fantail 3D Wooden Model | 1700 | - |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
