Cordia Ceramic Vacuum Cup 124823
10Description: Smart 300mL double-wall, vacuum insulated stainless steel coffee cup with a timeless curved design and a stunning powder coated finish. It features a ceramic lining which provides a clean taste and additional insulation, and will keep drinks hot or cold for hours.
Cordia laser engraves to a shiny steel finish and has a transparent push on lid with a sliding closure. The cup is BPA-free and is presented in a natural gift box.
This product is not dishwasher safe and handwashing is recommended.
Colours: Ecru, White, Mustard, Rust, Pale Pink, Burgundy, Sage, Olive, Pale Blue, Petrol Blue, Mauve, Carbon, Black.
Dimensions:
- Cup: Diameter 87mm × H 123mm
- Gift box: L 96mm × W 96mm × H 133mm
Materials:
- Cup: 201 stainless steel outer, 201 stainless steel and ceramic coating inner
- Lid: Acrylonitrile Styrene (AS) and a silicone seal
Packaging: Individual gift box
Price: from NZD $11.00 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Select Colour
-
Specific Colour Print 40mm × 40mm×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
(Positions)- 1
- 2
-
Screen Print 220mm × 43mm (one colour)×
Screen Print
Screen printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for branding flat or cylindrical objects.
Advantages
- Large print areas are possible on both flat and cylindrical products.
- Close PMS matches are possible on white or light coloured products.
- Ideal for large solid areas of colour.
- Most screen print inks are quick drying and can be shipped immediately after printing.
- Metallic gold and silver is available.
Limitations
- Halftones and very fine lines are not recommended.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Unable to print variable data.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Laser Engraving 52mm × 50mm × 58mm×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Ecru Cup | 820 | Late Feb 2025 |
| White Cup | 1150 | Early May 2025 |
| Mustard Cup | 690 | - |
| Rust Cup | 480 | Early May 2025 |
| Pale Pink Cup | 290 | Late Feb 2025 |
| Burgundy Cup | 700 | - |
| Sage Cup | 120 | Mid Apr 2025 |
| Olive Cup | 510 | Early May 2025 |
| Pale Blue Cup | 0 | Mid Dec |
| Petrol Blue Cup | 1200 | - |
| Mauve Cup | 680 | - |
| Carbon Cup | 1600 | - |
| Black Cup | 1400 | Early Dec |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
