Cordia Vacuum Gift Set
118370
25
Description: Double wall, vacuum insulated stainless steel drinkware set which is beautifully presented in a black or natural gift box. The set includes a 500mL Mirage Powder Coated Vacuum Bottle and a 300mL Cordia Vacuum Cup which is also powder coated. Mirage has a secure screw-on stainless steel lid and will keep drinks cold for up to 24 hours and hot for up to 12 hours. Cordia has a transparent push-on lid with a sliding closure, and will keep drinks hot for up to three hours.
Both items are BPA-free and laser engrave to a shiny steel finish, except for the silver bottle and cup which do not have a powder coated finish and laser engrave to a natural etch.
These products are not dishwasher safe and handwashing is recommended.
Colours: Silver, White, Yellow, Orange, Pink, Red, Bright Green, Kelly Green, Teal, Light Blue, Royal Blue, Navy, Purple, Black.
Dimensions:
- Mirage Bottle: Diameter 69mm × 258mm.
- Cordia Cup: Diameter 87mm × H 119mm.
- Gift box: W 300mm × L 238mm × 100mm.
Packaging: Gift box (natural or black).
Price: from NZD $29.75 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Select Colour
-
Specific Colour Print Mirage Bottle: 40mm × 60mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
(Positions)- 1
- 2
-
Specific Colour Print Cordia Cup: 40mm × 40mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
(Positions)- 1
- 2
-
Screen Print Mirage bottle: 195mm × 90mm.×
Screen Print
Screen printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for branding flat or cylindrical objects.
Advantages
- Large print areas are possible on both flat and cylindrical products.
- Close PMS matches are possible on white or light coloured products.
- Ideal for large solid areas of colour.
- Most screen print inks are quick drying and can be shipped immediately after printing.
- Metallic gold and silver is available.
Limitations
- Halftones and very fine lines are not recommended.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Unable to print variable data.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Screen Print Cordia Cup: 220mm × 43mm (one colour)×
Screen Print
Screen printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for branding flat or cylindrical objects.
Advantages
- Large print areas are possible on both flat and cylindrical products.
- Close PMS matches are possible on white or light coloured products.
- Ideal for large solid areas of colour.
- Most screen print inks are quick drying and can be shipped immediately after printing.
- Metallic gold and silver is available.
Limitations
- Halftones and very fine lines are not recommended.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Unable to print variable data.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Laser Engraving Mirage Bottle: 60mm × 90mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
-
Laser Engraving Cordia Cup: 52mm × 50mm × 58mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
-
Full Colour Print (Rotary Digital) Mirage Bottle: 218mm × 90mm.×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Full Colour Print (Rotary Digital) Cordia Cup: 266mm × 52mm×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Stainless Steel Cup | 650 | Mid Apr 2025 |
| White Cup | 5100 | Late Jan 2025 |
| Yellow Cup | 270 | Early May 2025 |
| Orange Cup | 1450 | Late Feb 2025 |
| Pink Cup | 19 | Mid Apr 2025 |
| Red Cup | 1750 | - |
| Bright Green Cup | 790 | - |
| Kelly Green Cup | 360 | Late Jan 2025 |
| Teal Cup | 1750 | Late Feb 2025 |
| Light Blue Cup | 0 | Late Jan 2025 |
| Royal Blue Cup | 1400 | Late Feb 2025 |
| Navy Cup | 1000 | Late Jan 2025 |
| Purple Cup | 3300 | - |
| Black Cup | 7600 | Late Jan 2025 |
| Silver Bottle | 140 | Mid Feb 2025 |
| White Bottle | 950 | Mid Feb 2025 |
| Yellow Bottle | 1100 | - |
| Orange Bottle | 0 | Mid Feb 2025 |
| Pink Bottle | 620 | - |
| Red Bottle | 720 | Mid Apr 2025 |
| Bright Green Bottle | 620 | - |
| Kelly Green Bottle | 1000 | - |
| Teal Bottle | 610 | - |
| Light Blue Bottle | 320 | Mid Jun 2025 |
| Royal Blue Bottle | 2350 | - |
| Navy Bottle | 1500 | Early May 2025 |
| Purple Bottle | 2400 | - |
| Black Bottle | 3550 | Mid Feb 2025 |
| Stainless Steel Dome Lid | 8400 | Mid Feb 2025 |
| White Lid | 1100 | Late Feb 2025 |
| Yellow Lid | 1150 | - |
| Orange Lid | 770 | - |
| Pink Lid | 500 | - |
| Red Lid | 1400 | - |
| Bright Green Lid | 540 | - |
| Kelly Green Lid | 530 | - |
| Teal Lid | 1050 | - |
| Light Blue Lid | 910 | Mid Jun 2025 |
| Royal Blue Lid | 990 | - |
| Navy Lid | 460 | Mid Apr 2025 |
| Purple Lid | 1900 | - |
| Black Lid | 3900 | Mid Feb 2025 |
| Natural Gift Box | 5400 | - |
| Natural Gift Box Insert | 5300 | - |
| Black Gift Box | 1400 | Late Apr 2025 |
| Black Gift Box Insert | 3250 | - |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
