Tahiti Water Bottle
LL1390
50
Description: Tahiti Water Bottle is a 725mL semi clear plastic drink bottle with a flip-up sip lid and straw. Made from BPA-free material, it is shatter, odour, and stain-resistant.
Perfect for staying hydrated on the go, this bottle is ideal for cold beverages and is not suitable for carbonated liquids or freezing.
For logo longevity, hand washing is recommended.
Colours: Yellow, Orange, Red, Light Green, Light Blue, Dark Blue
Dimensions: 235mm × 75mm diameter
Materials: BPA Free Material, abs lid
Packaging: Individual kraft box
- Unprinted: lids supplied separately, straws supplied unassembled
- Printed: straws supplied inside gift box. Individual unsealed polybags then individual kraft box
Price: from NZD $7.99 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Select Colour
-
Screen Print Roll print: 190mm × 65mm (one colour)×
Screen Print
Screen printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for branding flat or cylindrical objects.
Advantages
- Large print areas are possible on both flat and cylindrical products.
- Close PMS matches are possible on white or light coloured products.
- Ideal for large solid areas of colour.
- Most screen print inks are quick drying and can be shipped immediately after printing.
- Metallic gold and silver is available.
Limitations
- Halftones and very fine lines are not recommended.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Unable to print variable data.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Full Colour Print (Direct Digital) 30mm × 70mm×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
(Positions)- 1
- 2
-
Full Colour Print (Rotary Digital) Full wrap: 232.50mm × 75mm×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Full Colour Print (Gloss Rotary Digital) Full wrap: 232.50mm × 75mm×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
-
Personalisation Please also choose either Direct Digital or Box Sleeve print (includes Box ID label)
-
Personalisation (Rotary Digital) Please also choose Rotary Digital (includes Box ID label)×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Yellow | 995 | - |
| Orange | 506 | - |
| Red | 1668 | - |
| Light Green | 3147 | - |
| Light Blue | 369 | - |
| Dark Blue | 1870 | - |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
