Chameleon Coffee Mug
105059
48
Description: Round 330mL stoneware coffee mug with a thermochromic coating. Your logo “appears magically” when hot liquid is added and disappears again as the mug cools after use.
Chameleon is manufactured for spot colour or full colour wrap-around branding and is presented in a natural gift box.
A novel promotional product that is guaranteed to be the centre of attention.
The thermochromic coating can be overprinted but this print cannot be registered with the branding underneath.
This product is not dishwasher safe and handwashing is recommended.
Colour: White (with a full colour print).
Dimensions:
- Mug: Diameter: 84mm × H 96mm × 123mm (includes handle).
- Gift box: H 107mm × W 112mm × 91mm.
Packaging: Natural gift box.
Note: Price includes full colour printing. Overprinting is additional.
Price: from NZD $9.65 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
- Capacity: 330ml
- Insulation: Single Wall
- Finish: Gloss Glazed
- Gift Box (Included) Colour: Natural
- BPA Free: Yes
- Hot Liquid Suitable: Yes
- Wash Instructions: Hand Wash Recommended
- Dishwasher safe: No
- Country of Origin: China
- : Stoneware
-
Included Full Colour Print (Sublimation) 225mm × 92mm.×
Sublimation Print
Sublimation print is used for branding products that have a special coating on them or fabrics suitable for the sublimation process. A transfer is produced by printing sublimation ink onto transfer paper and then heat pressing it onto the product.
Advantages
- Sublimation ink is actually a dye so there is no ink build-up on the finished print and it looks like part of the product.
- Ideal for producing vivid full colour images as well as spot colour branding.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- The branding can bleed off some products.
Limitations
- Can only be used for suitable products with white surfaces.
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- When printing large images some minor imperfections may appear in the print or around the edges of it. These are unavoidable.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Specific Colour Print Overprint: 50mm × 30mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
-
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Black | 1200 | - |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
