Newport Tote Backpack
117298
25
Description: Extra-large tote bag that can also be worn as a backpack. The bag is manufactured from 300D polyester with a two-tone heather style finish. Newport features a zippered top closure, a front slip pocket with a domed closure, and a zipper to access the main compartment from the back of the bag.
The bag has a gusset for increased storage, adjustable side straps and padded shoulder straps and carry handles that are riveted to the bag for added strength.
Colour: Grey.
Dimensions: H 400mm × W 300mm × gusset 105mm (excludes handles and shoulder straps). Handle length: 380mm. Strap length (extended): 820mm.
Packaging: Loose packed.
Price: from NZD $16.48 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Screen Print 200mm × 150mm.×
Screen Print
Screen printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for branding flat or cylindrical objects.
Advantages
- Large print areas are possible on both flat and cylindrical products.
- Close PMS matches are possible on white or light coloured products.
- Ideal for large solid areas of colour.
- Most screen print inks are quick drying and can be shipped immediately after printing.
- Metallic gold and silver is available.
Limitations
- Halftones and very fine lines are not recommended.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Unable to print variable data.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Full Colour Print (Colourflex Transfer) 200mm × 150mm.×
Colourflex Transfer
Colourflex transfers are used for branding fabrics and are printed on transfer paper using a digital printing machine then heat pressed onto the product.
Advantages
- Cost effective method for producing spot colour or full colour transfers.
- Crisp, clear artwork reproduction is possible even on textured fabrics.
- Has a matt finish and will not crack or fade under normal circumstances.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- A thin, clear line of glue can sometimes be seen around the edges of the image.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
-
Embroidery (up to 10,000 stitches) 100mm × 70mm.×
Embroidery
Embroidery is an excellent way of branding bags, apparel and other textile products. It offers higher perceived value and a depth of branding quality which other processes can’t match and the finished image has a slightly raised effect. Embroidery uses rayon thread which is stitched into the product.
Advantages
- Only one setup charge applies per position for up to 12 thread colours.
Limitations
- Only approximate PMS colour matches are possible—the threads to be used are chosen from those available to give the closest possible match. See our thread colour chart for the colours available.
- It is best to avoid both fine detail and font sizes which are less than 4mm high in the artwork.
- Individual naming not available.
Artwork Requirements
- Vector artwork is preferred.
-
Embroidery (additional stitches) (per 5000).×
Embroidery
Embroidery is an excellent way of branding bags, apparel and other textile products. It offers higher perceived value and a depth of branding quality which other processes can’t match and the finished image has a slightly raised effect. Embroidery uses rayon thread which is stitched into the product.
Advantages
- Only one setup charge applies per position for up to 12 thread colours.
Limitations
- Only approximate PMS colour matches are possible—the threads to be used are chosen from those available to give the closest possible match. See our thread colour chart for the colours available.
- It is best to avoid both fine detail and font sizes which are less than 4mm high in the artwork.
- Individual naming not available.
Artwork Requirements
- Vector artwork is preferred.
(Positions)- 1
- 2
-
Embroidery (metallic thread) (per 1000)×
Embroidery
Embroidery is an excellent way of branding bags, apparel and other textile products. It offers higher perceived value and a depth of branding quality which other processes can’t match and the finished image has a slightly raised effect. Embroidery uses rayon thread which is stitched into the product.
Advantages
- Only one setup charge applies per position for up to 12 thread colours.
Limitations
- Only approximate PMS colour matches are possible—the threads to be used are chosen from those available to give the closest possible match. See our thread colour chart for the colours available.
- It is best to avoid both fine detail and font sizes which are less than 4mm high in the artwork.
- Individual naming not available.
Artwork Requirements
- Vector artwork is preferred.
(Positions)
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Grey | 1100 | Late Apr 2025 |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).