Custom Womens Sports Singlet
121174
10
Description: Moisture-wicking women’s sports singlet. It is manufactured from 150gsm 100% polyester ultra-mesh which is both breathable and fast drying. Tape on the collar and armholes add strength and structure to the garment.
The singlet is available in six sizes and can be branded edge-to-edge in full colour.
Colour: White (with a full colour print).
Sizes:
|
_ |
8 |
10 |
12 |
14 |
16 |
18 |
|---|---|---|---|---|---|---|
|
Half Chest (cm) |
43.5 |
46 |
48.5 |
50.5 |
53 |
55.5 |
|
Length (cm) |
60 |
62 |
64 |
66 |
68 |
70 |
Packaging: Loose packed.
Notes: Price breaks apply per artwork design. There may be an artwork charge for complicated orders. Custom artwork will be PMS matched as closely as CMYK inks allow. Personalisation options, e.g., names and numbers are available. Production lead time of 35 working days.
Price: from NZD $17.04 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Included Full Colour Print (Sublimation) Please refer to template.×
Sublimation Print
Sublimation print is used for branding products that have a special coating on them or fabrics suitable for the sublimation process. A transfer is produced by printing sublimation ink onto transfer paper and then heat pressing it onto the product.
Advantages
- Sublimation ink is actually a dye so there is no ink build-up on the finished print and it looks like part of the product.
- Ideal for producing vivid full colour images as well as spot colour branding.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- The branding can bleed off some products.
Limitations
- Can only be used for suitable products with white surfaces.
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- When printing large images some minor imperfections may appear in the print or around the edges of it. These are unavoidable.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
(Positions)
- 1
- 2
- 3
- 4
- 5
Stock Levels
No stock level information available currently.
