Nomad Vacuum Bottle (Carry Lid)
121939
25
Description: Classic 650mL double-wall, vacuum insulated stainless steel (BPA-free) drink bottle which has an durable powder coated matt finish. It will keep drinks cold for 24 hours or hot for up to 12 hours and offers a carry lid for easy transportation. It laser engraves to a shiny steel finish.
Nomad is nicely presented in a black gift box or an optional gift tube.
This product is not dishwasher safe and handwashing is recommended.
Colours: Grey, Ecru, White, Yellow, Mustard, Orange, Rust, Pale Pink, Pink, Red, Burgundy, Sage, Olive, Bright Green, Dark Green, Teal, Pale Blue, Petrol Blue, Light Blue, Royal Blue, Navy, Mauve, Purple, Black.
Dimensions:
- Bottle: Diameter 72mm × H 250mm.
- Gift tube: Diameter 88mm × H 293mm.
Packaging: Gift box or optional gift tube.
Price: from NZD $12.64 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Select Colour
-
Screen Print 180mm × 120mm.×
Screen Print
Screen printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for branding flat or cylindrical objects.
Advantages
- Large print areas are possible on both flat and cylindrical products.
- Close PMS matches are possible on white or light coloured products.
- Ideal for large solid areas of colour.
- Most screen print inks are quick drying and can be shipped immediately after printing.
- Metallic gold and silver is available.
Limitations
- Halftones and very fine lines are not recommended.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Unable to print variable data.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Laser Engraving 60mm × 100mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
-
Full Colour Print (Rotary Digital) 224mm × 163mm.×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
-
Specific Colour Print Gift tube: 50mm circle (tube or top of lid, one colour).×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
- 3
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Grey Bottle | 1350 | - |
| Ecru | 350 | - |
| White Bottle | 310 | Late Jul |
| Yellow Bottle | 430 | Early Sep |
| Mustard | 920 | - |
| Orange Bottle | 970 | Early Oct |
| Rust | 690 | - |
| Pale Pink | 790 | - |
| Pink Bottle | 640 | - |
| Red Bottle | 1400 | Early Oct |
| Burgundy | 860 | - |
| Sage | 450 | Early Oct |
| Olive | 760 | - |
| Bright Green Bottle | 1500 | - |
| Dark Green Bottle | 800 | Early Oct |
| Teal Bottle | 1850 | Early Oct |
| Pale Blue | 700 | - |
| Petrol Blue | 720 | - |
| Light Blue Bottle | 0 | Late Jul |
| Royal Blue Bottle | 3900 | - |
| Navy Bottle | 1400 | Late Jul |
| Mauve | 770 | - |
| Purple Bottle | 1450 | - |
| Black Bottle | 14200 | Early Oct |
| Black Lid | 6800 | Early Oct |
| Natural Gift Tube | 2300 | - |
| Black Gift Tube | 3800 | - |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
