» » » Venus Glass Bottle (Full Colour)

Venus Glass Bottle (Full Colour) 115845

Description: Deluxe 600mL borosilicate glass drink bottle which has an insulating soft touch neoprene sleeve that keeps drinks cool for longer. The sleeve is accented with grey binding and it has a grey woven carry strap. Both the sleeve and base can be branded in stunning full colour.

Venus has a secure screw-on stainless steel lid which can be laser engraved with a logo.

Borosilicate is a lightweight glass that is exceptionally strong and shatter resistant. Glass is a natural choice for a clean, pure taste and it offers a safe and eco-friendly alternative.

This product is not intended to be used with carbonated or hot liquids. Handwashing is recommended.

Colour:

Bottle: Clear.
Sleeve: White (with a full colour print).

Dimensions: Diameter 65mm × H 238mm.

Packaging: Loose packed.

Notes: A production lead time of 20 working days applies to the sleeve by air freight and larger orders can be sea freighted on request to reduce the freight cost.

Price: from NZD$11.50 unbranded. See your price—use the price calculator below.

Printing template (PDF file):

Included Full Colour Print (Sublimation) Please refer to template.
×
Sublimation Print

Sublimation print is used for branding products that have a special coating on them or fabrics suitable for the sublimation process. A transfer is produced by printing sublimation ink onto transfer paper and then heat pressing it onto the product.

Advantages

Sublimation ink is actually a dye so there is no ink build-up on the finished print and it looks like part of the product.

Ideal for producing vivid full colour images as well as spot colour branding.

Can print variable data including individual names.

Only one set up charge is required irrespective of the number of print colours.

The branding can bleed off some products.

Limitations

Can only be used for suitable products with white surfaces.

Only approximate PMS colours can be reproduced.

Some colours cannot be reproduced including metallic silver and gold.

When printing large images some minor imperfections may appear in the print or around the edges of it. These are unavoidable.

Artwork Requirements

Artwork can be supplied in either vector or bitmap format.

Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
Laser Engraving Lid: 35mm circle.
×
Laser Engraving

Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.

Advantages

Higher perceived value than other forms of branding.

The branding becomes part of the surface and is permanent.

Gives a similar finish to etching on glassware at a much lower cost.

Can mark curved or uneven products.

Can produce variable data including individual names.

The product can be shipped as soon as marking is finished.

Limitations

The size of branding areas is limited on curved surfaces.

Fine detail can be lost on smaller products like pens.

Artwork Requirements

Artwork should be supplied in vector format.